曲作鹏         副教授

电子邮箱：   z.qu@ncepu.edu.cn  

  zp_qu@hotmail.com

研究领域：

表面工程及再制造技术

垃圾/生物质焚烧设备高温防腐蚀涂层技术

二维材料特性研究及其应用

固废资源化综合利用技术

生物质能转化利用技术

燃料的高效清洁利用和节能环保技术

高温固体氧化物燃料电池技术

简历：

曲作鹏博士，华北电力大学副教授，硕士研究生导师，2010年于荷兰代尔夫特理工大学能源与过程工程系获得博士学位。2013年5月至今，在华北电力大学可再生能源学院工作。

获得荣誉：

曾获江苏省“双创人才”，“333人才”工程，淮安市十大杰出青年称号。

代表论文及著作：

[1] Qu, Z., Simulation and Analysis of an Anode-Supported Solid Oxide Fuel Cell and Stack. PhD thesis. ISBN

978-90-8570-747-9

[2] Qu, Z.,Heat transfer (chapter of heat transfer in solid oxide fuel cell). Book chapter. ISBN 978-953-307-582-2

[3] Qu, Z., P.V. Aravind, N.J.J. Dekker, A.H.H. Janssen, N. Woudstra, A.H.M. Verkooijen. Three-dimensional thermo-fluid and electrochemical modeling of anode-supported planar solid oxide fuel cell. Journal of Power Sources, 2010. 195(23): p. 7787-7795.

[4] Qu, Z., P.V. Aravind, S.Z. Boksteen, N.J.J. Dekker, A.H.H. Janssen,

N. Woudstra, A.H.M. Verkooijen. Three-dimensional computational fluid dynamics modeling of anode-supported planar. International Journal of Hydrogen Energy, 2011. 36(16): p. 10209-10220.

[5] Qu, Z., P.V. Aravind, Ye, H., N.J.J. Dekker, A.H.H. Janssen, N.

Woudstra, A.H.M. Verkooijen. Three-dimensional modeling of anode supported planar SOFC with direct internal reforming. ECS (Electrochemical Society) Transactions, SOFC-XI, Volume 25, Issue 2, 2009

[6] Qu, Z., P.V. Aravind, N.J.J. Dekker, A.H.H. Janssen, N. Woudstra, A.H.M. Verkooijen. Flow distribution and pressure variation in the manifolds of SOFC stack. Proceedings of 8th European Solid Oxide Fuel Cell Forum, July 2008

[7] Qu, Z., P.V. Aravind, N.J.J. Dekker, A.H.H. Janssen, N. Woudstra, A.H.M. Verkooijen. Flow distribution in the external manifold of SOFC stack. ASME proceedings of the 2nd International Conference on Energy Sustainability (ES), August 2008.

[8] Qu, Z., P.V. Aravind, N.J.J. Dekker, A.H.H. Janssen, N. Woudstra, A.H.M. Verkooijen.. Modeling of flow field in planar solid oxide fuel cell. Proceedings of the 21st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS), June 2008

[9] Qu, Z., An overview of solid oxide fuel cell SOFC stack design and modeling, Technical Report ET-2255, Delft University of Technology/Faculty of 3mE, The Netherlands, October 2006.

[10] Qu, Z., Exergy analysis of integrated gasification combined cycle IGCC power plant with pre-combustion CO2 capture, Technical Report ET-2254, Delft University of Technology/Faculty of 3mE, The Netherlands, June 2006.

[11] Qu, Z., Exergy analysis of post-combustion CO2 capture of conventional coal-fired power plant, Technical Report ET-2253, Delft University of Technology/Faculty of 3mE, The Netherlands, April 2006.

[12] Xu,S., Qu, Z., An Advanced Anode Supported Solid Oxide Fuel Cell Flow Field Design with Pressure Equalization Slots[C]. 2nd IEEE Conference on Energy lnternet and Energy System lntegration. Beijing, 2018: 2228-2233.

[13] Liu, M, Qu, Z., Modeling Work of a Small Scale Gasifier/SOFC CHP System, The 8th Latin American Congress on Electricity Generation and Transmission, Ubatuba, Brazil, October 2009.

[14] Fan, L., Qu, Z., Computational Studies for the Evaluation of Fuel Flexibility in Solid Oxide Fuel Cells: A Case with Biosyngas. Fuel Cells, 2013 (3) 410–427.

[15] Qu, Z., Tang. H., Electrical and optical characterization of MoS2 thin film transistor and the effect of strain on their performances, EuroSim 2019.

[16] Qu, Z., Liu, L., Ye, H., High selectivity and sensitivity sulfur dioxide sensor based on SnSe monolayer ICEPT 2019

[17] Qu, Z., Yang, H., Ye, H.,Study on photoelectrical properties of Nb-MoS2, Theoretically and experimentally, ICEPT 2019

[18] Gao, C., Qu, Z., Ye, H. Gallium Sulfide: A Promising Candidate for NH3 Sensor With High Sensitivity and Selectivity, ICEPT 2019

代表专利：

[1] 曲作鹏、欧阳晓平，受热面防磨蚀的水冷壁用管及其制备方法与应用，中国，PCT/CN2018/11 8156

[2] 曲作鹏、刘宗德、董长青，受热面防磨蚀的膜式水冷壁及其制备方法，中国， PCT/CN2019/07 198

[3] 曲作鹏，中速磨煤机磨辊耐磨堆焊用粉芯焊丝及其制备与堆焊方，中国，CN201110303169，2013.09.25，

[4] 曲作鹏、陈威，一种金属陶瓷焊丝及其制备方法，CN201510264476，中国

[5] 曲作鹏、陈威、欧阳晓平，一种受热面防腐蚀的水冷壁及其制备方法与应用，CN 201811150322.9，中国

[6] 曲作鹏、陈大智，一种受热面防腐蚀的膜式水冷壁及其制备方法，CN201811150408.1，中国

[7] 曲作鹏、朱丹，一种纳子母弹斗部，CN201811323313.5 中国

[8] 曲作鹏、叶怀宇，一种膜式壁双枪立式堆焊装置，CN201821177387.8 中国

[9] 曲作鹏、叶怀宇，一种膜式壁立式堆焊夹具，CN201821177386.3 中国

[10] 曲作鹏、陈威、李志胜，一种膜式壁堆焊整形工装，CN201821177388.2 中国

[11] 曲作鹏、陈威、余腾江，一种转子锥形面熔覆工装，CN201821155730.9 中国

[12] 沙德生、曲作鹏，一种船型板焊接工装，CN201821176769.9 中国

[13] 沙德生、曲作鹏，一种锅炉燃烧器钝体，CN201821925815.0 中国